Inlet openings
We are able to install gate and door openings in the hall in a wide variety of designs. From simple two-wing sliding gates with sheet filling to sectional gates with remote control.
The gates are offered in a large variety of dimensions; therefore, everyone can make his or her choice with us exactly according to their needs. For really large openings, such as for hangar gates, we offer a simple solution in the form of accordion gates made from technical PVC fabric.
In essence, the gate or door opening can be located anywhere along the hall perimeter. If the openings are located in the front walls, their placement is simpler in as much as the entire front area can be used basically. There are some limiting factors for locating gate openings in the side walls, particularly the hall side height, which affects the maximum gate height.
Lighting, heating
If the hall is clad in technical PVC fabric, its light transmission is in most cases sufficient for common activities inside and there is no need for additional lighting of the internal space.
However, if the demands for lighting of internal spaces are higher, internal lighting including complete wiring can be installed on the load-bearing structure without any problems.
The lighting is designed for the specific space, according to the demands for the necessary lighting intensity (lux) and the internal layout, such as aisles in storage rooms.
Electricity distribution is not limited to only lighting itself, but can be implemented as a complete subdelivery.
Naturally, the hall internal spaces can be heated. Most frequently, hot-air fans, called Roburs, are used, deployed within the hall, to which the heating medium is supplied.
Alternatively, other available technologies for heating can certainly be used, such as radiant panels.
Stands, lambrinas
Whatever activity or sport is performed in the hall, the utility value of the building can be enhanced and audience comfort increased by internal built-in stands or benches. The stands are designed with regard to the internal space layout, both for standing and sitting persons, on several levels, always according to the customer’s specific needs.
If you carry out equestrian sports, and not only them, you will appreciate the possibility of installation of lambrina into the internal space of the hall. Lambrina can be installed on the side as well as front wall of the hall, thus insuring maximum safety in the hall. The lambrina design is variable with regard to its shape and overall dimensions.
Ventilation and air exhaustion
For sufficient supply of the internal space of the hall with fresh air, it is suitable to equip it with ventilation elements, such as self-acting air exhaust turbines and exhaust blinds. Self-acting exhaust blinds are an element operating without power supply, thus providing for air exhaust from the hall space.
The air exhaust blinds are directly located in the hall cladding and provide fresh air supply into the hall space. Another option for hall space aeration is the use of net windows, or net ventilation bands.
In the case of increased demands for air exchange, or if air exchange at a certain amount per hour is specified for the hall, forced ventilation can be installed in the form of fans of the given capacity.